Saturday, September 12, 2015

Gear I Use: HCD-Floater

Field Journal Entry (September 6, 2015)  I forgot to take my headlamp out of the truck and stick it in my waders.  It’s dark, it’s 8:00 PM, and I’ve stumbled my way back upriver to where I parked along the highway.  I got to the boulder garden at 5:00 PM, threw a hopper-copper-dropper rig for two hours with a 12-foot floating line, switched over to a single hopper pattern for the last hour, and caught around twenty browns.  I didn’t count.  This is what September in the canyons is all about!

September and October on the Arkansas of my favorite times of the year!  Just right for a HCD-Floater rig and a tenkara rod.

Over the past 30 years or so I’ve come to realize that there are very few, if any, absolutes when it comes to fly angling.  However, there ARE some things that work undeniably well, and John Barr’s three-fly system, the hopper-copper-dropper (HCD), is one of those, and there’s no reason why this can’t be done with a tenkara rod!  There are times and places for going trad, and my full-flex rod, 3.5 level line, and eyeless sakasa kebari patterns are what I go for.  Some days I’ll fish that way with only one pattern, and it’s very enjoyable.  Then there are other times and places when it’s equally enjoyable to test the capabilities of a tenkara rod.  That’s what this article is about.

In an article on I read a while back, co-written by Barr and Charlie Craven, they had this to say about the HCD…

“Barr’s three-fly method removes most of the agonizing gamble that comes with deciding what trout might choose to eat on any given day and where. John Barr, who conjured up the solution from his tying bench in Boulder, Colorado, calls it the ‘Hopper-Copper-Dropper’, an alliterative way to describe a setup that is as risk-free as angling ever gets.

Barr didn’t invent the three-fly method. Anglers have been tossing–and tangling–multiple-fly rigs for years. But he has refined that approach into a system that has not only proven itself on Colorado’s hard-fished waters but around the United States.”

I’ve been pushing the envelope of what tenkara is capable of doing for quite a while, so I thought why not give the HCD a try?.  I’ve basically taken the “traditional” HCD used by western fly anglers, refined it for use with tenkara, and the results couldn’t have been better!  This isn’t an approach for ALL mountain water, but it is an approach for a LOT of mountain water, especially if your personal adventures take you to rivers like the Arkansas, my local “big” river.  


A classic (western) HCD setup includes a #10 BC Hopper strike indicator/top fly, a relatively heavy  #14 Copper John dropper, and a smaller midge emerger, caddis pupae, or baetis emerger bottom fly.  I started out with the pattern sizes that would be used with a typical 5 or 6 weight western fly rod, and found them to be too big.  So here’s one tip…go down one size on all three, if you can.  This will make the three-fly rig a little more wind resistant when casting or when it’s windy, and it’ll work with the more flexible tenkara rod (more on rods later).  Here are my favorite HCD-Floater combos for tenkara:

Hopper/Indicator Patterns:
#14 Baby Boy Hopper
#14 Moorish Hopper
#14 Hippie Stomper (red)
#16 Yeager’s Trude Neversink (peacock) (FAVORITE)
#14 Amy’s Ant (red)
#14 409 (red)
#16 Chubby Chernobyl (tan/tan)

Copper John/Mid-size Droppers:
#16 Copper John (red)
#16 Rubber Legs Copper John (FAVORITE)
#16 Poxyback PMD
#16 October Caddis Larva
#16 Psycho Prince (purple)
#16 Montana Prince
#18 Two Bit Hooker

Bottom/Smallest Dropper:
#18 Gunkel’s Shot Glass Emerger (FAVORITE)
#18 RS2
#18 CDC Pheasant Tail
#18 Gold Ice
#18 Jujubaetis
#18 Jujubee Midges

A #10 BC Hopper.  A classic top fly for HCD with a western fly rod,
 but a bit too big for a tenkara rod.

#14 Hipper Stomper (red)

#14 Amy's Ant (red)

#16 Chubby Chernobyl

Classic #16 "coppers" for HCD-Floater
on a tenkara rod.
#14 Moorish Hopper

HCD-Floater "droppers", all #18


The HCD-Floater method works best with a floating line, and RIGS FLY SHOP MAKES THE BEST ONE OUT THERE!  Yeah, I’ve got it, I work for RIGS, but they don’t pay me to push lines.  The RIGS lines speak for themselves, and we sell a ton of them, and for good reason.  I’ve taken the RIGS floating lines from the San Miguel, Big Cimarron, and Gunnison all the way home to the Arkansas.  They just flat out work for the HCD-Floater system (among others).  Here’s why.  First, these are (in the tenkara world) big, brawny rivers.  Most native flows are around 400 CFS in the shoulder seasons, and the water is often 75 feet across.  The wind almost always blows, especially in east-west running canyons like the Colorado and the Arkansas.  You need a line that’s functional in the wind, floats so you can drift that big, floaty hopper drag-free, and one that can effectively cast a relatively heavy three-fly rig.  The line material on the RIGS lines makes all of that possible, with a buoyant, comparatively heavy line.  The addition of a tippet ring makes threading tippet and changing out tippet material infinitely easier.  As a guide who threads a tippet ring hundreds of times each season, I find that a selling point.  As a middle-aged man who wears bifocals constantly, I find that a selling point!  The addition of a large connection loop and an in-line high-vis strike indicator make this a highly functional line for non-traditional tenkara.

With the largest usable tippet for tenkara set at 5X, that’s where I start from the tippet ring on the line down to the top fly.  I use mono for this section of tippet.  I use flouro tippet material from the top fly down to the first dropper, staying at 5X.  The section from the first dropper down to the second gets 6X fluoro.  Going with fluoro on the bottom two sections of tippet keeps visibility down in the water, and fluoro is both denser and stiffer, which helps turn the cast over better than with mono.  I will typically run around 5 feet of tippet from the line down to the top hopper/indicator fly.  The droppers are each run about 16” below the preceding fly.  So, from tippet ring to bottom fly, this setup is just shy of 8 feet in length.  Add a 12-15’ floating line into the equation, and you have 20-23 feet of line from rod tip to bottom fly.  That’s a lot for a tenkara rod to handle, and you really need the right rod to make this work best.  Rods are next.


The rivers are usually “big” on the tenkara scale, the canyons are usually windy, and the HCD and floating line are comparatively heavy.  You don’t want to take a 5:5 level line tenkara rod on a trip like this.  What you DO want to take is a rod that flexes toward the tip (a stiff 6:4 or a 7:3) and is at least twelve (360cm) feet long.  Rods that have performed well for me fishing a HCD on a floating line are the venerable Amago by Tenkara USA, the beautiful Nissin Zerosum 400 7:3, and my current favorite, the now-discontinued (but still available, if you look hard) Daiwa LT39SF.  I much prefer the lighter weight, better balance, and casting performance of the Daiwa, although my Amago sure did catch a lot of browns on the Arkansas.  In a pinch, the Iwana by Tenkara USA would do, and if you have the Daiwa LT36SF it would do even better.  Both rods are a little short at twelve feet and 390 centimeters respectively, but they’ll work.  I think you get the idea…a 12-foot-plus, tip-flex rod.

You’ll need a rod like this because of the weight of the line and flies, and the ever-present wind.  A mid-flex rod simply can’t keep up with either very well.  A third factor that a tip-flex rod will handle better is current.  Bigger water means heavier flows, and turning a 16” brown trout in 450 cfs water takes a robust rod.

Casting an HCD-Floater rig requires a slower cast, a little more pause at the end of the backcast, and a bit of a push going forward to deliver it to the water.  It’s not complicated, but it’ll take a few casts to get in the groove.  Once you get in that groove, it’s pretty easy to nail the same seam, the middle of the same big pocket, or the mid-current glass that you’re aiming for.

Well, there you have it, non-traditional tenkara at its best.  Some may even say that it’s not really tenkara.  Matters not to me.  What I do know is that I’m using a tenkara rod, and it’s a whole lot of fun!  So, if you want to experience the possibilities of non-traditional tenkara, or love fishing the HCD with a western fly rod and want to try it with a fixed-line rod, give it a try!  


Thursday, September 3, 2015

Catching Up!

I’m finally home from a long, busy summer in Ridgway, Colorado, where I work full-time as a professional tenkara guide and fly shop bum at RIGS Fly Shop and Guide Service.  There really wasn’t much time for anything else, with days off few and far between.  I’ll guess that RIGS does two-thirds of their business between June and August, so drinking from the fire hydrant is the norm.  I was fortunate to be surrounded by fellow guides and shop folks who take hard work to a new level.  We have a solid team at RIGS, led by co-owners Tim and Heather Patterson.  The two of them set a high standard for hard work, flexibility, and perseverance during a busy, stressful time of year.  I couldn’t ask for a better place to work!

Closing down the fly shop on my last day behind the counter in mid-August.

The busiest place in Ridgeway, Colorado!

In all, I guided 25 trips, and spent the rest of the summer working in the fly shop or shuttling whitewater raft trips.  Combined with the two tenkara weekend clinics I put on each year, that puts my guiding up above 30 days per year.  Not too shabby, if you ask me!

Happy clients, happy guide!  

Most of my guided tenkara trips take place in the Cimarron Range, which is a northern extension of the San Juans.  Ridges, spires, turrets, and hoodoos form a line, running north from Uncompahgre Peak all the way to Cerro Summit.  This is stunning country!  The drive from Ridgway over Owl Creek Pass is arguably one of the most scenic anywhere in Colorado.  We’re permitted in the Uncompahgre Wilderness, so my trips can be done from the extreme southern headwaters of the three forks of the Cimarron River all the way up to the northern boundary of the Uncompahgre National Forest, just below Big Cimarron Campground.  At the fly shop we call this entire area “The Cimarrons”, and it provides a vast, diverse region that’s absolutely perfect for tenkara.  Each drainage above Silver Jack Reservoir holds its own special qualities, and is unique.  Each one of them requires different strategies and techniques, ranging from the wide-open lower end of East Fork, to the brushy and intimate pools and pockets of West Fork, and the twists and turns of Middle Fork.  One of my favorite places to guide in late summer is the Cimarron River tailwater below Silver Jack Reservoir.  It’s technically a tailwater, but it looks much more like a freestone.

The Cimarron River above Silver Jack Reservoir. (Photo courtesy of Stephen and Melissa Alcorn)

Once or twice a summer, if the water is lower and clear, I guide on the San Miguel River between Telluride and Norwood.  This summer “The Miguel”, as we call it, turned out to be very fishable, and my clients caught some really nice rainbows.  There are few things more fun than drifting a #14 Crystal Stimulator or Puterbaugh Caddis on the far edge and having a nice sixteen-inch rainbow crush your fly and take you for a ride.  A fish like that on a tenkara rod is simply amazing!

The San Miguel River below Telluride.

In all, it was a great summer season!  It’s always fun to head 200 miles southwest to Ridgway, and it’s equally good to return home to my family each August.  To my clients this summer…THANK YOU!  I had some amazing days standing beside you in wild water.  I hope you learned a thing or two.  One of the most rewarding things about guiding is spending quality time with such interesting people.  To do so in such magnificent country makes it all that much better!   

My last two clients of the season, Tim and Mona.  We had a stellar day fishing the Cimarron River backcountry!